Heavy-Forgings.com Product Programme

Forged Tube Sheets

Large forged tube sheets for heat exchangers, reactors, pressure vessels and high-pressure process equipment.

Tube sheets can be supplied as forged blanks, rough-machined components or fully machined and drilled parts according to customer drawings, material specifications, inspection requirements and project documentation.

✓
Tube-sheet drilling up to 7.5 mUp to 1 m thickness in documented machining capability
✓
Supply to drawingAs-forged · rough-machined · fully machined & drilled
✓
Pressure-equipment documentationPED · AD 2000-W0 · EN 10204 3.1 / 3.2
Product Overview

Large Forged Tube Sheets

Tube sheets are critical pressure-containing and structural components in shell-and-tube heat exchangers, reactors, high-pressure heaters, condensers and other process equipment.

For demanding applications, forged construction provides a controlled manufacturing route for large section thicknesses, demanding materials, specified mechanical properties, material traceability and inspection.

Hongda’s documented product programme includes reaction-vessel tube sheets, high-pressure heater tube sheets, stainless-steel tube sheets, 30408 tube sheets and heat-exchanger tube-sheet components.

Heavy-Forgings.com is operated by REVROK. The commercial route begins with the buyer’s application, drawing and documentation requirements so that the forging, machining, drilling and inspection route can be defined before quotation.

Typical Applications

Where Forged Tube Sheets Are Used

◆

Heat Exchangers

Large tube sheets for shell-and-tube exchangers in refinery, chemical and process service.

◆

Reactors

Forged tube sheets and pressure components for reactor and process-vessel applications.

◆

High-Pressure Heaters

Heavy tube sheets for power-generation and high-pressure heat-transfer equipment.

◆

Petrochemical & Refining

Pressure-equipment tube sheets for demanding temperature and process conditions.

◆

Power & Energy

Tube sheets for condensers, heaters and heavy heat-transfer equipment.

Materials & Standards

Material Selection for Pressure Equipment

Carbon & Low-Alloy Steels

  • SA105 / SA266
  • SA350
  • SA508
  • SA765
  • 16Mn / 20MnMo / 20MnNiMo families

Stainless & Duplex

  • F304 / F316
  • F321 / F347
  • F310 / F44 / F904L
  • F51 / F60 / F53 / F55 duplex grades
  • Other customer-specified grades

Documentation & Standards

International enquiries should start with the required EN or ASTM/ASME material specification, design code, mechanical properties, heat treatment, NDT, dimensional tolerances and certification requirements.

Supply Condition

From Forged Blank to Fully Machined Tube Sheet

As Forged

Forged blank supplied with machining allowance for subsequent customer machining and inspection.

Rough Machined

Scale and excess material removed, with dimensions prepared for further machining and inspection.

Fully Machined & Drilled

Finish machining and tube-hole drilling according to agreed customer drawing, tolerances and documentation requirements.

Manufacturing Route

From Forging to Finished Tube Sheet

The route is selected around material, outside diameter, thickness, mechanical properties, machining allowance, drilling pattern and inspection scope.

Illustrative heavy open-die forging operation for tube-sheet blank

Forging

Heavy forging route selected to develop a sound tube-sheet blank with the required section integrity and material properties.

Illustrative heat treatment stage for large forged component

Heat Treatment

Material-specific heat treatment according to grade, mechanical-property requirements and applicable pressure-equipment specification.

Large finish-machined forged tube sheet

Machining & Drilling

Turning, milling, boring and tube-hole drilling to drawing. Documented tube-plate drilling capability reaches 7.5 m diameter and 1 m thickness.

Illustrative inspection of large forged pressure-equipment component

Inspection & Certification

Material traceability, mechanical testing, dimensional inspection, NDT and EN 10204 certification according to project requirements.

Product Examples

Forged Tube Sheet Applications

Clean product and manufacturing images only — no watermarked source images are used on this page.

RFQ Preparation

Information Needed for a Tube Sheet Quotation

For an efficient technical review, please provide the equipment application, material specification, outside diameter, thickness, finished dimensions, quantity and required supply condition.

Where applicable, include tube-hole pattern / drilling drawing, surface finish, machining tolerance, NDT, EN 10204 3.1 / 3.2 requirements, customer inspection and third-party inspection requirements.

International Commercial Coordination

REVROK coordinates the commercial process

REVROK coordinates account development, application review, drawing and design-code clarification, RFQs, quotations and commercial follow-up. Direct technical communication with the manufacturing partner can be arranged wherever required while maintaining one commercial coordination point.

Application & equipment review
Drawing / drilling-pattern clarification
Material and code review
Quotation coordination
Commercial follow-up
Outcome / win-loss tracking
Request a Quotation

Forged Tube Sheets RFQ

Send the drawing, tube-sheet specification or initial requirement. REVROK will review the application and coordinate technical feasibility, machining / drilling route and quotation.

Please include material grade, OD, thickness, quantity, tube-hole pattern, supply condition, design code, inspection requirements and required delivery.