Language: EN | DE | IT | ES | AR
Large hot forged rings in heavy forging production
Technical resources · integrated heavy-forging capability

From Steelmaking to Very-Heavy Finished Forgings

A rare integrated manufacturing route combining steelmaking, secondary refining, very-heavy open-die forging, ring rolling, heat treatment, machining, inspection and project documentation for critical industrial components.

Heavy-Forgings.com is operated by REVROK for European and Middle East market development. Wuxi Hongda Heavy Industry is the current primary manufacturing partner.

Heavy forging production · primary manufacturing partner
160 MN / 16,000 t press9.5 m clearance · 9 m opening · German 600 T/M manipulator
Up to 300 t classVery-large ingots / project-specific heavy forgings
100 t EAF · LF · VDIntegrated steelmaking and secondary metallurgy
100+ machining machinesHeavy drilling · boring · turning · milling · cladding
Why the combination matters

Not just a large press — an integrated heavy-manufacturing route

Large forging capacity is only one part of the manufacturing problem. For critical pressure, energy, marine and mechanical components, the starting steel, ingot quality, forging ratio, heat treatment, machining envelope, NDT, inspection and final documentation all affect whether a component can be supplied successfully.

Hongda’s 2026 Changshu Hongteng facility adds steelmaking and a 160 MN open-die forging line to an established group already operating multiple forging presses, ring rollers, heat-treatment equipment, heavy machining, cladding, NDT and laboratory testing.

2026 integrated plant

Steelmaking, secondary metallurgy and heavy forging

The new Changshu Hongteng plant has been in normal production since April 2026. Project-specific maximum dimensions and weights remain subject to material, geometry, forging route, heat treatment, machining and inspection requirements.

100 t Electric Arc Furnace

Primary melting route for special steels, integrated with secondary refining before ingot casting.

LF + VD Refining

Ladle refining and vacuum degassing provide additional control over chemistry, gases and steel cleanliness.

300 t Ingot Class

Hongda’s current public plant information states stable casting of high-purity, high-density ingots up to 300 t single weight.

Electroslag Equipment

Electroslag equipment is listed within the current steelmaking section; use of a remelt route should be confirmed project by project.

Open-die forging

160 MN / 16,000 t heavy forging line

CapabilityTechnical detailCommercial relevance
Press force160 MN / approximately 16,000 tVery-heavy open-die forging and large-section deformation
Press clearanceApprox. 9.5 mAccommodates very-large workpieces and tooling
Opening / column spacingApprox. 9 mSupports large-diameter and long heavy components
ManipulatorImported German 600 T/M unitControlled handling and rotation during heavy forging sequences
Supporting facilitiesLarge heat-treatment furnaces and solution-treatment water poolsSupports integrated post-forging thermal processing
Project examplesExtra-large tube sheets, reactor shell rings, power rotors, marine crankshaftsRelevant to pressure, energy, marine and heavy-engineering sectors

Note: final maximum forging weight and dimensions must be confirmed against the drawing and specification. Heavy-Forgings.com uses the 300 t class as a project-development capability, not as an unconditional limit for every geometry or material.

Manufacturing route

From ingot to inspected component

The buyer should evaluate the entire route rather than press size alone.

Heavy open-die forging process

Open-Die Forging

Large engineered forgings to drawing, including critical pressure, shaft, rotor and machinery components.

Hot ring rolling process

Ring Rolling

Seamless ring production for pressure equipment, machinery, bearings, gear blanks and heavy circular components.

Finish-machined heavy forged cylinder

Heat Treatment & Machining

As-forged, rough-machined or finish-machined supply depending on drawing and project scope.

Inspection of a large forged component

Inspection & Certification

Mechanical testing, metallography, UT, MT, dimensional inspection and project documentation.

Ring rolling and large circular forgings

Seamless rings, discs, shells and tube sheets

Rolled Rings

Established ring rolling includes 1.2 m, 3 m and 6 m equipment. Larger project dimensions should be reviewed against the new heavy-forging route and final geometry.

Tube Sheets

Large tube-sheet forging and drilling for heat exchangers, reactors, high-pressure heaters and process equipment. Current published drilling capability reaches approximately Ø7.5 m × 1 m thick.

Discs & Shells

Very-large discs, shell rings and cylindrical forgings can be evaluated for pressure, energy and heavy-equipment applications.

Heavy machining

Machining capacity must match forging capacity

Hongda reports more than 100 sets of machining equipment.

OperationPublished capability
Tube-sheet drillingUp to approximately Ø7.5 m and 1 m thickness
Shaft deep-hole drillingApproximately 10 m on the current public equipment page; other internal documentation references longer capability
Gantry machining9 m class gantry equipment; project envelope to be confirmed
General heavy machiningSawing, turning, boring, milling, drilling, grinding
CladdingCNC and manual cladding / weld-overlay capability for tube plates, cylinders and related components
Heat treatment

Large-component thermal processing

Gas Furnaces

Large natural-gas furnace capacity for heating and heat-treatment cycles.

Electric Furnaces

CNC-controlled electric furnaces for controlled thermal processing.

Pit Furnaces

Vertical treatment route particularly relevant to long shafts and elongated forgings.

Quenching Systems

Water, oil and chemical quenching systems; project-specific cycle must match grade and required properties.

Material range

From pressure-vessel steels to nickel, titanium and high-temperature alloys

The material list is unusually broad for a group that also operates very-heavy open-die forging. Availability must always be confirmed against product form, size, melt route and certification scope.

Material familyRepresentative grades / series
Carbon & structural steels10, 20, 35, 45, 55; Q355, Q390, Q420, Q460, Q690
Pressure-vessel alloy steels16Mn(D), 20MnMo(D), 20MnMoNb, 20MnNiMo, 09MnNiD, SA105/SA266, SA350, SA508, SA765, F11, F22, F22V
Quenched & tempered alloy steels40Cr, 42CrMo, 34CrNiMo6, 30CrNiMo8, 36NiCrMo16 and related grades
Stainless steels304/304L, 316/316L, 317 and martensitic stainless families
Duplex & precipitation-hardening stainlessF51-type duplex families and PH stainless grades
Nickel alloysPure nickel, MONEL, INCONEL, INCOLOY, NIMONIC series
High-temperature alloysIron-, nickel- and cobalt-based high-temperature alloy families
Titanium & aluminiumTC/TA/TB titanium series and aluminium grades including 2214, 2A14, 5A06
Quality, inspection and certification

Project-specific qualification rather than generic badges

Certification scope must be checked against the exact material, product form, size and project.

PED

EU Pressure Equipment Directive capability for applicable pressure-equipment supply.

API

API certification listed by Hongda; project scope should be checked against the current certificate.

Marine

Multiple classification-society approvals including ABS, BV, DNV, NK, KR, LR, RINA and others.

AS9100 / CNAS

Aerospace-related quality certification plus accredited laboratory / testing capability within the group.

Mechanical Testing

Room- and elevated-temperature tensile, hardness and other mechanical-property testing.

Metallurgical Testing

Metallography, drop-weight / drop-hammer related testing, endurance and end-quench capability.

NDT

Ultrasonic and magnetic-particle testing equipment plus project-specific inspection arrangements.

Product & application routes

Technical entry points for buyers

Technical resources

Primary and authoritative reference links

Use these links to verify current equipment, materials, approvals and applicable European/API requirements.

Hongda — About / 2026 integrated plant

Current public information on the 100 t EAF, LF + VD route, 160 MN press and 300 t ingot class.

Hongda — Equipment & manufacturing capability

Open-die presses, closed-die equipment, ring rollers, steelmaking, heat treatment, machining, cladding and testing.

Hongda — Material list

Published carbon, pressure, alloy, stainless, duplex, nickel, high-temperature, titanium and aluminium grades.

Hongda — Certifications

Current public certificate portfolio including PED, API, marine, AS9100 and CNAS-related approvals.

European Commission — Pressure Equipment Directive

Authoritative EU reference for PED 2014/68/EU.

American Petroleum Institute — Standards catalogue

Authoritative API standards resource; confirm the current applicable specification and certification scope.

Technical RFQ

Send the drawing, specification or initial requirement

REVROK will review the application, identify the relevant manufacturing route and coordinate technical clarification and quotation.

For very-large forgings, maximum dimensions and weights must be confirmed against material, geometry, heat treatment, machining and inspection requirements.