Heavy-Forgings.com Product Programme

Pressure Vessel Forgings

Large forged components for pressure vessels, reactors, heat exchangers and high-pressure process equipment.

This is a first-priority market-development area: medium and large pressure-equipment forgings where forging scale, machining, material traceability and European documentation create a meaningful advantage.

✓
Pressure-equipment rangeTube sheets · shells · rings · flanges · heads
✓
Large machiningTube-sheet drilling up to 7.5 m diameter
✓
DocumentationPED · AD 2000-W0 · EN 10204 3.1 / 3.2
Technical Overview

Pressure Vessel Forgings

Pressure-equipment forgings must combine material integrity, traceability, dimensional control and documentation with the mechanical requirements of the vessel, reactor or heat exchanger.

Hongda’s documented petrochemical and pressure-equipment range includes flanges, pipe-fitting forgings, flange covers, tube plates, heads, manholes and cylinders used in heat exchangers, reactors and related equipment.

The wider heavy open-die programme includes hydrogenation-reactor shell rings, large tube-sheet capability and other pressure-equipment forgings. The correct supply route should be defined from the customer drawing and design-code requirements.

Heavy-Forgings.com is operated by REVROK. The commercial route starts with the buyer’s application, drawing and technical requirements so that the correct manufacturing route, material, machining scope and inspection plan can be established before quotation.

Representative Capability Image

Large Forged Components for Pressure Equipment

The image shown is an illustrative representation of a pressure-equipment forging programme combining tube sheets, thick-wall shells, large flanges, nozzles and other heavy forged components.

Actual supply is always based on the customer’s drawing, design code, material specification, machining scope, inspection plan and required certification.

Illustrative pressure vessel forgings including tube sheet shell flange and nozzle components
Pressure Vessel Forgings — illustrative representative capability image
Typical Applications

Where These Forgings Are Used

◆

Pressure Vessels

Heavy forged pressure-containing components and vessel parts.

◆

Heat Exchangers

Tube sheets, flanges and related forged components.

◆

Reactors

Shell rings, heads, flanges and special reactor forgings.

◆

Petrochemical & Refining

Forgings for refinery, chemical and process equipment.

◆

High-Pressure Systems

Material-controlled forged components for demanding pressure service.

Materials & Standards

Define the Requirement at RFQ Stage

Materials

  • SA105 / SA266 / SA350 / SA508 / SA765 families
  • Chrome-moly and low-alloy pressure-vessel steels
  • Stainless steels including F304 / F316 / F321 / F347 families
  • Duplex grades including F51 / F53 / F55
  • Nickel-alloy grades where required by the application

Standards

EN and ASTM/ASME material specifications are prioritised for international work. PED / AD 2000-W0 and EN 10204 3.1 / 3.2 documentation can be incorporated according to product, material and inspection route.

Supply Condition

As-forged, rough-machined or finish-machined to drawing, including tube-sheet drilling, large-component machining and project-specific inspection where required.

Manufacturing Route

From Forging to Finished Component

The manufacturing route is selected around geometry, material, mechanical properties, heat treatment, machining scope and inspection requirements.

Forging

Open-die forging route selected around section size, material and required reduction.

Heat Treatment

Material-specific heat treatment for required vessel and reactor properties.

Machining

Large-component machining, boring and drilling to drawing and code requirements.

Inspection

Material traceability, dimensional inspection, mechanical testing and NDT as specified.

International Commercial Coordination

REVROK coordinates the commercial process

REVROK coordinates pressure-equipment account development, drawing and code clarification, RFQs, quotations and commercial follow-up, while technical discussion with the manufacturing partner can be arranged whenever required.

Application qualification
Drawing and specification review
Material and standard clarification
Quotation coordination
Commercial follow-up
Outcome / win-loss tracking
Request a Quotation

Pressure Vessel Forgings RFQ

Send the drawing, specification or initial requirement. REVROK will review the application and coordinate technical feasibility, manufacturing route and quotation.

Please include equipment type, design code, material grade, OD / ID / thickness or finished dimensions, quantity, machining scope, inspection / certification requirements and delivery date.